Wolftooth GnarWolf ISCG05 Chainguide

If you are a rider that fearlessly takes the tough lines and can't afford to drop a chain, the Wolf Tooth GnarWolf® chainguide is for you. Designed specifically for any bike that has ISCG 05 Mount and a 1x wide/narrow chainring, the GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. 

• Patented infinite chainline adjustment between 45mm and 51mm via an elliptical expanding mandrel. No shims required.
• Infinite vertical adjustment between 28t and 36t for round chainrings and 28t-34t oval chainrings
• Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments
• All adjustments made with common 4 mm hex key
• Designed for the rigors of Enduro, heavy trail, mud and even DH riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g
• Specific guide shaping is optimized for use with oval and round chainrings
• Installation takes just a few minutes – no need to remove your crank arms

COMPATIBILITY

• Designed to fit on any bike with an ISCG 05 Mount
• Optimized for use with both elliptical and round chainrings: Round chainrings 28t-36t or oval chainrings 28t-34t
• For 1x use only
• Minimum distance of 10 mm between crank and center of ring
• Not compatible with crankset mounted bashrings

Due to frame and bike geometry there will be some bikes that need modifications or flat out won't work. Here are the known exceptions:

• Ibis Mojo 3 - will not work
• Ibis Ripmo - will not work
• Ibis Ripley - will not work
• Specialized Stumpjumper 2016-2017 models require 1 mm of spacers (washers will work) between the frames ISCG05 mounts and the guide (the guide interferes with the frame otherwise).
• Evil The Following - will not work (upper swing arm interferes)
• Santa Cruz Tallboy - will not work

SPECIFICATIONS

Weight: 44g
Material: 6061-T6 with stainless steel hardware
Made in the USA